AKO PROPlus 1565 Serie Guía Rápida página 23

FAN control
Fans stop temperature (controlled by probe 2)
(Probe 2 should be active)
Fans differential s2
Stops when compressor OFF?
Fans state during defrost
Connected Disconnected
Fans delay after defrost
Stop when opening door?
(It requires a digital input configured as door contact)
ALARM control
Alarm configuration:
Maximum alarm in sensor 1 (limits according to the alarm configuration)
Minimum alarm in sensor 1 (limits according to the alarm configuration)
Alarm differential
Temperature alarm delay
Start-up alarm delay
Alarm delay after defrost
On-Off door alarm delay
Off-On door alarm delay
Alarm relay after key (After pressing the ESC key, alarm silenced):
Connected Disconnected
DIGITAL INPUT control
Input 1 configuration :
Disabled Door contact
Severe external alarm Remote defrost
Low pressure input Thermostat control
Input 1 alarm delay
Input 1 polarity:
Normally open – The input is activated on closing the contact
Normally closed – The input is activated on opening the contact
Input 2 configuration :
Disabled Door contact
Severe external alarm Remote defrost
Low pressure input Thermostat control
* See table page 25
Description
Description
Relative to the SP Absolute
Description
External alarm
Remote energy saving
External alarm
Remote energy saving
23
1565H051 Ed.01
Units Min Def Max.
(ºC/ºF) –40.0 4.0 99.9
(ºC/ºF) 0.1 1.0 20.0
No
Defrost
(min.) 0 3 255
No
Units Min Def Max.
Rel.
320
(ºC/ºF) A. Min. 50.0
(ºC/ºF) –40.0 50.0 A. Max.
(ºC/ºF)
0.1 1.0 20.0
0 30 255
(min.)
0 0 255
(min.)
0 0 255
(min.)
0 0 255
(min.)
0 0 255
(min.)
Con.
Units Min Def Max.
Def.
(min.) 0 0 255
NC
*