Environmental Protection; Installation Instructions; Before Installation; Installation - Teka CP 15 GS Guía De Uso

Ocultar thumbs Ver también para CP 15 GS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

- The temperature selector is broken.
The on/off switch does not light up.
Disposal of the packaging
The packaging bears the Green Point mark.
Dispose of all the packaging materials such
as cardboard, expanded polystyrene and
plastic wrapping in the appropriate bins. In
this way you can be sure that the packaging
materials will be re-used.
Disposal of equipment no longer used
According to European Directive 2012/19/EU
on the management of waste electrical and
electronic
equipment
electrical appliances should not be put into
the normal systems for disposal of solid
urban waste.

Before installation

Check that the input voltage indicated on
the characteristics plate is the same as the
voltage of the power outlet you are going to
use.
Open the drawer and take out all the
accessories
and
material.
Attention! The front surface of the crockery
heater may be wrapped in a protective film.
Before using the crockery warmer for the
first time, remove this film carefully.
Make sure that the crockery warmer is
not damaged in any way. Check that the
drawer opens and closes correctly. If you
find any damage, contact the Technical
Assistance Service.
(WEEE),
home
remove
the
packing
-
Outdated appliances should be collected
separately to optimise component material
recovery and re-cycling rates and to prevent
potential harm to human health and the
environment. The symbol of a rubbish
container superimposed by a diagonal cross
should be put on all such products to remind
people of their obligation to have such items
collected separately.
Consumers
should
authorities or point of sale and request
information on the appropriate places to
leave their old home electrical appliances.
Before disposing of your appliance, render it
non-usable by pulling out the power cable,
cutting this and disposing of it.
Attention: the power socket should be
easily
accessible
warmer has been installed.
The crockery warmer should only be built-in
in
combination
with
indicated by the manufacturer. If it is fitted
in combination with other appliances, the
guarantee is no longer valid since it is
impossible to guarantee that the crockery
warmer will work correctly.

Installation

To
build-in
the
combination with another appliance there
must be a fixed, interim shelf in the housing
unit
to
support
appliances.
The appliance to be combined with the
crockery warmer will be placed directly on
EN
contact
their
local
after
the
crockery
those
appliances
crockery
warmer
the
weight
of
both
in
23

Publicidad

Tabla de contenido
loading

Tabla de contenido