Smarter tools S-200i Manual De Instrucciones página 9

HOT PARTS can cause severe burns.


MAGNETIC FIELDS can affect pacemakers.


NOISE can damage hearing.


CYLINDERS can explode if damaged.
Shielding gas cylinders contain gas under high pressure. If damaged, a cylinder
can explode. Since gas cylinders are normally part of the welding process, be
sure to treat them carefully.


 Keep cylinders away from any welding or other electrical circuits.
 Never drape a welding torch over a gas cylinder.
 Never allow a welding electrode to touch any cylinder.
Do not touch hot parts bare handed.
Allow cooling period before working on gun or torch.
Pacemaker wearers keep away.
Wearers should consult their doctor before going near arc
welding, gouging, or spot welding operations.
Excessive noise from some processes or equipment can
damage hearing.
Wear approved ear protection if noise level is high.
Protect compressed gas cylinders from excessive heat,
mechanical shocks, slag, open flames, sparks, and arcs.
Install cylinders in an upright position by securing to a
stationary support or cylinder rack to prevent falling or
tipping.
1-6