Cleaning And Maintenance; Guarantee - AEG SRR 4308 CD/MP3 Instrucciones De Servicio/Garantía

Programmed Playback
This permits programming of any desired order of tracks.
1. Press Stop.
2. Press the PROG/MEM button (12/40). The symbol
„P01" (memory location), the track number (00) and
the word MEMORY appear in the display. In MP3 for-
mat the number of the fi le (00) fl ashes, while the track
number (000), the word MEMORY and the memory
storage number P-01 are shown.
3. Press the !/ I
select the desired track and then press the PROG/
MEM button again. The display changes to storage
location P02. In MP3 mode the desired folder can
be selected fi rst. If you press the PROG/MEM button
again the track number can be selected.
4. Press the !/ I
the next track and press the PROG/MEM button again.
Repeat this process until you have selected all tracks.
5. Press the II button. Playback now begins. The word
MEMORY lights up. With this button you can also
briefl y interrupt the programme.
6. When the !/ I
pressed the selected order is shown.
7. Press once the Stop key (11/48) to stop the
playback while retaining the program. The MEMORY
control lamp goes out.
8. To resume the playback of the program press fi rst the
PROG/MEM key once and then the
9. The device stops automatically once the entire
sequence of programmed tracks is completed.
10. To delete the program (in stop mode) fi rst press the
PROG/MEM button and then the
11. The programmed order remains stored in the memory
until the CD is removed from the CD compartment or
the device is switched off.
It is also possible to combine the programmed tracks with
the REPEAT function. After you have programmed and
started the device, please press the REPEAT button (13/41)
up to fourth times and then you can use the functions as
described under „REPEAT".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music
in MP3 format. The device also supports all standard CD
types: CD, CD-RW, CD-R. The active ESP function always
appears in the display (memory 40 seconds); see item
"ESP".
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machi-
ne detects an MP3 CD automatically (The total number of
tracks appears in the display). If you would like to play one
58
05-SRR 4308 CD AEG New 58
/ I /n buttons (9/38/47) to
/ I /n buttons to choose
/ I /n buttons (9/38/47) are
II key.
Stop button.
of these CDs, proceed as described under „Playing CDs".
Tracks can be programmed as described under „Playing
Back Programmed Tracks".
Note: Due to differences in the quality of CDs and CD
blanks, as well as the large number of different softwa-
re writing programs and the non-compliance with fi xed
standards by the music industry (copy protection),
there may be problems with the playback of CDs. This
is not a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
This device has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibi-
lity and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24
month guarantee starting on the date of purchase (receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or, at
our discretion, by replacing it. The guarantee services do
not entail an extension of the life of the guarantee nor do
they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of purchase.
Without proof of purchase no free replacement or repair will
be carried out.
If you wish to make a claim under the guarantee please
return the entire machine in the original packaging to
your dealer together with the receipt.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing (e.g.
motor pistons, kneading blades, drive shafts, spare remote
control, spare toothbrushes, saw blades, etc.) as well as
cleaning, maintenance or the replacement of said parts are
not covered by the guarantee and hence are to be paid!
The guarantee lapses in case of unauthorized tampering.
08.07.2005, 9:05:05 Uhr