Functions - Velleman VM101 Manual Del Usuario

OPERATION
At power-up, the unit performs a self-test. Next, LD1 to LD4 flash for 5 seconds indicating the
current operating mode. The operating mode can be changed at this time by keeping the
'Mode'- push button pressed until the flashing stops. Next, by repeated pressing the 'Mode'-
pushbutton the desired mode can be selected. Once the correct mode has been selected,
release the Mode push button. After 5 seconds the LED's start to flash again for 5 seconds
after wich the selection is stored in the memory. Consequently, LED 4 will light to indicate that
the selected function has been memorised.
MODE
( = off = on)
LD4-LD3-LD2-LD1
On/off switch. A short push toggles between 'ON' and 'OFF' (teleruptor-
Function 1
On/off switch
Function 2
with
pushbutton
dimmer.
Slow ON
Function 3
dimmer
Slow OFF
Function 4
dimmer
Slow ON/OFF
Function 5
dimmer
Repeat slow
Function 6
on and off
dimmer.
Staircase
Function 7
switch with
slow off dim
function.
Soft on/off
Function 8
and preferred
light intensity
memory
mode).
Application: General lighting control, no dimming
A short push toggles between 'OFF' and the last set intensity.
Continuous pushing adjusts intensity. Stops at both min. and
max. intensity.
Application: General lighting control with dimming
As long as the button is pushed the intensity gradually
increases to max. level. It remains at max. until the button is
released.
Application: Greenhouse, etc.
As long as the button is pushed the intensity remains at max.
level. At release the intensity gradually decreases until the
'OFF'-state is reached.
Application: Child's bedroom, etc.
Push the button to gradually increase intensity until max. level.
At release, intensity gradually decreases until the 'OFF'-state is
reached.
Application: Pet breeding and farming (chickens, birds, etc)
As long as the button is pushed the intensity gradually
increases to max. and decreases to 'OFF'.
Application: Lighting for atmosphere, parties, seasonal,...
A short push turns on at max. level for a period DELAY1*, after
which it slowly decreases to 'OFF' in a period DELAY2*. Push
again to restart at max. level. A long push turns off.
Application: Staircase, children's bedrooms, etc
A short push gradually increases intensity from 'OFF' to max.
level (soft on), a second push gradually decreases intensity
back to the 'OFF'-state (soft off). Press button briefly during
'soft on' to store and maintain current intensity. A short push
now toggles between 'OFF' and the stored intensity. Pushing
twice during 'soft off' causes intensity to rise to max. level
Application: TV-room, abient lighting, ...
DESCRIPTION

Functions

7