Technical Specifications - EtiamPro HAA52N Manual Del Usuario

•
•

7. Technical Specifications

current consumption ......................................15 mA @ 12 VDC
operating voltage ............................. 8-16 VDC, 12 VDC nominal
detection method ..... passive IR with alternate polarity processing
power-up delay ................................... 2 min. with flashing LED
alarm period ........................................................ 2-3 seconds
alarm output ............. NO or NC contact with 10 Ω in-line resistor
walk test LED .............. alarm indicator, enable-disable selectable
pulse counting ............... normal response or 2 pulses within 10 s
tamper switch .................... NC contact with 10 Ω in-line resistor
operating temperature ................................... -10 °C to +55 °C
humidity ................................................. 95% non-condensing
dimensions ................................................. 105 x 60 x 42 mm
weight ............................................................................ 82 g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or
injury resulting from (incorrect) use of this device. For
more info concerning this product and the latest version of
this manual, please visit our website www.velleman.eu.
The information in this manual is subject to change
without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be
copied, reproduced, translated or reduced to any electronic
medium or otherwise without the prior written consent of the
copyright holder.
V. 03 – 08/06/2020
Alarm is triggered when the detector is tripped under
standard alternate polarity signal processing at normal
condition.
The harsh condition requires the detector to be tripped twice
within ten seconds under double alternate polarity signal
processing.
HAA52N
7 ©Velleman nv