Other Convenience Functions - JVC LT-22HD32U Manual De Instrucciones

Other convenience functions

Selected Items
Picture
Picture Mode
Standard
Vivid
Soft
User
Brightness / Contrast / Sharpness / Colour / Tint
(available only when you selected "User" at
Picture Mode)
Backlight
(available only when you selected "User" at
Picture Mode)
Colour Temperature
Noise Reduction
Off / Low / Middle / High
Reset
Sound
Sound Mode
Standard / Movie / Music / Speech
/ User
Bass / Treble / Balance
Surround
On / Off
Stable Sound
On / Off
Reset
Channel
Setup hint
Standard picture quality (factory-set)
Enhanced picture contrast and sharpness (factory-set)
Intended for bad-quality signals (factory-set)
Your personal preferences
You can adjust the picture to your preference.
• Tint is available in NTSC-signal mode or Component/
HDMI-signal with 60Hz.
You can use the Backlight feature to adjust the screen
brightness for improved picture clarity.
Neutral (Standard) / Reddish (Warm) / Bluish (Cool)
Sometimes it is not possible to input a high-quality HD
signal. The actual signal input is too small and noisy,
e.g. a video film in letterbox format, or a noisy analogue
cable TV signal. This feature can slightly reduce
interferences caused by the faulty input signal.
Select "Reset" to reset Picture options to the factory
preset values.
You can change the sound mode setting. If you select
"User", you can change the setting of Bass and Treble
and TV memorizes your setting.
You can adjust the sound quality to your preference.
The Surround feature processes the audio signal to
expand the listening field wider and deeper to create a
'pseudo surround-sound' from the TV's speakers.
The feature works with stereo signals from TV broadcast
or AV input.
This will automatically adjust volume so each channel
and input has the same average volume level.
Select "Reset" to reset Sound Mode, Bass, Treble and
Balance to the factory preset values.
See page 12-13.
19