Checking The Led Indicators; Installing Software - 3Com 7760 Guía De Rápida Instalación

6. Checking the LED Indicators

When the Access Point is connected to power, LEDs indicate activity as follows:

7. Installing Software

The following applications and documents are included on the 3Com CD-ROM:
•
Wireless Infrastructure Device Manager
•
User manual
•
This Quick Start Guide
You need to install the Wireless Infrastructure Device Manager software (WIDMan) on your
computer to discover and configure the Access Point.
1
Turn on your computer.
2
Insert the 3Com Installation CD into the CD-ROM drive.
The CD menu appears. If it does not appear, you can start the Setup menu from the
Windows Start menu. For example: Start > Run > d:setup.exe.
3
On the menu, click Utilities.
LED Color Indicates
Power Green Power On
Off Power Off
11a Green Indicates that wireless networking is
enabled. If the LED is flashing, the
wireless link is OK and data is being
transmitted or received.
Off The radio is off
11b/g Green Indicates that wireless networking is
enabled. If the LED is flashing, the
wireless link is OK and data is being
transmitted or received.
Off The radio is off
100 Green Indicates a 100Base-T network is
detected at the Ethernet port. If the
LED is flashing, the link is OK and
data is being transmitted or received.
Off No link
10 Green Indicates a 10Base-T network is
detected at the Ethernet port. If the
LED is flashing, the link is OK and
data is being transmitted or received.
Off No link
9