Genius Audio GMX Serie Manual Del Usuario página 13

www.geniuscaraudio.com
12. Switch: What allows to configure the amplifier from 4 Channels to 2 Channels.
13. PROTECTION LED light
If the active amplifier protection mode, this LED will light red.
14. Power Input
Feed B (+) and the pole to ground (GND) use 4 AWG while the remote uses an entry-gauge 12 AWG (REM terminal is
used to turn on and off remotely the amplifier when applied to + 12V )
15. Speakers Input
The speaker terminals are nickel plated allowing connection cables maximum size 10 AWG feeding the horn. NOTE:
The configuration of each channel must be verified by qualified personnel.
1 3 4 5 2 7 8 9 10 11 6
13
12
2 STABLE STEREO - 4 BRIDGED MIN.
14 15
GMX SERIES
- 13 -