4. REPLACING THE FUSE
When the transmitter is not turned on, check that
the fuse is in good condition. Otherwise, it must
be replaced by a new one.
1. Turn off the transmitter.
2. Unscrew the nut on the connector, remove the
nut and the piece of steel.
3.
Replace
reassemble the connector.
5. SPECIFICATIONS
Input: 12V- - -
Transmission frequency: FM 87.5MHz-108MHz
Remote control:
Input: 3V- - - (1xCR2025)
Product design and specifications are subject to change, without notice.
10
10
the
fuse
(F1AL250V)
and