Dismount And Disconnect The Drive; Further Advise - Toshiba CANVIO PREMIUM Manual De Usuario

Dismount and disconnect the drive

It is strongly recommended not to unplug the drive by just unplugging the
cable connection as it may be that data is written to the drive at that time.
Such data will be lost and the drive may be damaged physically!
Please follow the steps below for a safe dismount of the drive.
< Windows
1. Click the "Hardware and Eject Media – icon"
2. Select the TOSHIBA drive to eject.
3. Click "OK" and you can unplug the drive now.
< Mac >
Ctrl-click on the hard disk icon and choose "Eject".
OR
Drag the hard disk icon to the trashcan.
You can unplug the drive now.
Cleaning the drive case / enclosure
Before cleaning the drive, make sure that it's physically disconnected from
the computer. We suggest to use standard products for cleaning it and to
make sure that possible remaining liquid on the surface will be wiped off.

Further Advise

For any further action of normal operation such as renaming the drive,
backup data, or file management, we suggest to read your operation
system user's manual.
Also for maintenance tasks such as defragmenting and optimisation we
suggest to refer to the operating system user's manual.
We also strongly suggest having anti-virus software installed to protect your
data against intended damage caused by virus or trojan programs.
User's Manual
PC >
®
A pop-up message box will appear listing the external devices
connected to your computer.
After a few seconds, you will get the notification that it is now safe to
remove the device.
CANVIO PREMIUM
EN-6