Problem Solving; Specifications - GBC AdvancedPunch Pro Manual De Instrucciones

Displaying Information on the LCD Panel
1. Die type
This is the type of die-set that is currently installed in the
punch.
2. Die cycles
This is the total number of sheets punched with the currently
installed die-set.
3. Punch cycles
This is the total number of punched sheets the system has
processed.
4. Firmware
This displays the
AdvancedPunch Pro.

6. PROBLEM SOLVING

Probable Cause
No power, won't punch
Punched holes not aligned with
the edge of the paper
Sheet jamming repeatedly at die
set area.
Insert Chip tray message on the
LCD interface.
current level of firmware
Probable Cause
Power cord not attached to back
of machine or not properly
plugged into the wall.
Follow instructions on die set
labels to properly configure the
die for a specific sheet size
Remove the die-set, inspect the
die throat to see if there is any
stuck paper chad.
Make sure the Chip tray is fully
inserted.
AdvancedPunch

7. SPECIFICATIONS

Speed
Punch Sheet Size and
Edge
LEF- Long Edge Fed
SEF- Short Edge Fed
of
Tab Stock
Paper Stock
Clear Cover
Paper Bypass Mode
Sheet size
Punch Capacity
Power Supply
Electrical
Safety Certification
Dimensions
Weight
Shipping Weight
Manufactured
TM
Up to 144 sheets per minute
US Sizes
LTR LEF
LTR SEF
LTR SEF Double Punch
Statement LEF
Legal SEF
Ledger SEF
Ledger SEF Double Punch
9" x 12" SEF
9" x 12" SEF Double Punch
9" x 12" LEF
12" x 18" SEF
12" x 18" SEF Double Punch
ISO sizes
A4 LEF
A4 SEF
A4 SEF Double Punch
A5 LEF
A3 SEF
A3 SEF Double Punch
SRA4 SEF
SRA4 SEF Double Punch
SRA4 LEF
SRA3 SEF
SRA3 SEF Double Punch
US Sizes
LTR, with 3, 4, 5, 8,10 tabs
Statement, with 3 and 5 tabs
ISO Sizes
A4, with 5 and 10 tabs
A5, with 3 and 5 tabs
Plain: 75gsm - 300gsm
(20# bond to 110# cover)
Coated: 120gsm - 300gsm
(32# bond to 110# cover)
7mil
Paper sizes and stocks same as printer
Single Sheet
115V, 60Hz, Single Phase
230V, 50Hz, Single Phase
Amps and 115V; 3.8A; 60Hz
Frequency 230V; 1.9A; 50Hz
cULus
L: 725mm; W: 445mm; H: 990mm
L: 29"; W: 17.5"; H: 39"
99 kg
218 lbs
127 kg
280 lbs.
Assembled in Taiwan
Pro
GB
9