Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12
ASSEMBLY
12.1
Preparatory activities
12.1.1 Delivery content
Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
12.1.2 Workplace requirements
The workplace has to fulfill the requirements.
The ground has to be even, in level and hard. It must be suitable at least to weight it with double
weight per square meter than the machines net weight.
The chosen workplace must have access to a suitable electric supply net hat complies with the
machines requirements.
12.1.3 Transport
The machine can be transported in package with a forklift.
The machine is very heavy. The machine shall be lifted from crate with a suitable lifting device only
that is certified to be able to carry the machines load.
The lifting and transportation of the machine must only be carried out by
qualified staff and must be carried out with appropriate equipment.
Note that lifting equipment used (crane, forklift, sling, etc.) must be in perfect condition.
To maneuver the machine in the packaging can also a pallet jack or a forklift be used.
Uncoated metal machine parts have been insulated with a greasy layer to inhibit corrosion.
This layer has to be removed. You can use standard solvents that do not damage the machine
surface.
12.1.4 Assembly
This machine is completely assembled, just needs
to assemble the machine stand.
You only has to place the machine aggregate onto the assembled
machine base.
Push the holiding rod of the workpiece end stop into the
containing bushing in the vice and fix it.
Check all bolt and screw connections and retighten them if
necessary.
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
W A R N I N G
ASSEMBLY
25
BS 210TOP / BS 275TOP
Publicidad
Tabla de contenido
