Assembly; Bs115 - HOLZMANN MASCHINEN BS 115 Manual De Instrucciones

13

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please
understand that later claims cannot be accepted anymore.

13.1 BS115

Delivery Content BS115
Assembly steps BS115
HOLZMANN MASCHINEN GmbH
1. fold out the side parts of the feet and fix the corner
brackets with rubber feet using screws, washers,
spring washers and nuts on it.
2. Fold out the side parts at the 2nd foot and fix the
corner brackets and the wheel axle as shown using
screws, washers, spring washers and nuts on it.
3. connect the two feet by means of the connection plate
and screws, washers, spring washers and nuts (1).
www.holzmann-maschinen.at
1 machine
2 support rod vertical table
3 stop
4 handwheel vise
5 belt cover
6 Vertical table
7 feet x2
8 connection plate base frame
9 wheels x2
10 Wheel axle
11 Corner brackets base frame x2
12 Corner brackets base frame with rubber feets x2
13 tools
14 Cotter pin x2
15 Screws, washers, spring washers, nuts
16 Handle
39
BS115 / BS128HDR