D-Link DCH-M225 Guía De Instalación Rápida página 8

TrOuBLESHOOTING
SEtuP And ConFiGurAtion ProBLEMS
1. HOW dO I rESET MY dCH-M225 WI-FI AudIO ExTENdEr TO FACTOrY dEFAuLT
SETTINGS?
- Ensure the product is powered on.
- Using a paperclip, press and hold the reset button on the bottom of the device for 5
seconds.
Note: Resetting the product to the factory default will erase the current configuration
settings. The default Wi-Fi network name (SSID) and password are printed on
the DCH-M225's Wi-Fi Configuration Card.
2. HOW dO I CONNECT A PC Or OTHEr dEVICE TO THE dCH-M225 IF I HAVE FOrGOTTEN
MY WI-FI NETWOrK NAME (SSId) Or WI-FI PASSWOrd?
- If you haven't changed the extended Wi-Fi network's settings, you can use the
network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.
- If you did change the network name (SSID) or Wi-Fi password and you did not record
this information on the Wi-Fi Configuration Card or somewhere else, you must reset
the device as described in Question 1 above.
- It is recomended that you make a record of this information so that you can easily
connect additional wireless devices in the future. You can use the included Wi-Fi
Configuration Card to record this important information for future use.
6
dCH-M225