Product Setup - D-Link DCH-M225 Guía De Instalación Rápida

PrOduCT SETuP

SEtuP
SELECT YOur METHOd
There are two methods available for setting up the DCH-M225 - with the QRS Mobile
App, or using Wi-Fi Protected Setup (WPS).
SET uP dCH-M225 WITH QrS MOBILE APP
4
First, make sure that the QRS Mobile app is
installed on your phone or tablet. Then connect to
the DCH-M225 from your mobile device's wireless
utility. Select the DCH-M225 network name (SSID)
and enter the password (both the SSID and
password are on your Wi-Fi Configuration Card).
Open QRS Mobile and the Setup Wizard will
appear. Tap Start to begin. The DCH-M225 will
first scan for wireless networks from nearby
wireless routers or APs. Select the wireless
network that you wish to extend, and enter the
password (if required).
You can either keep the current network name
(SSID) and password for the extended Wi-Fi
network, or enter a new network name (SSID)
and password. Then, you can choose to create an
admin password to access the DCH-M225's web-
based configuration utility. Tap Next to continue.
Note: If you choose to change the SSID and
password, it is recommended that you make a
record of this information for future reference.
A summary of the network settings will then be
displayed. Once you are satisfied, click Save, and
the setup wizard will reboot the DCH-M225 for
the new settings to take effect. The DCH-M225's
extended network can now be used.
dCH-M225