Before Use; Inserting / Changing The Battery - Powerfix Profi HG00304 Instrucciones De Utilización Y De Seguridad

Never throw batteries into fire or water!
Do not exert mechanical loads to batteries.
Risk of battery leakage
In the event of a battery leak, immediately remove it from the device
to prevent damage!
Avoid contact with the skin, eyes and mucous membranes! In the event of con-
tact with battery acid, thoroughly flush the affected area with plenty of clean
water and seek immediate medical attention!
Avoid extreme environmental conditions and temperatures, which could affect
batteries, e.g. above radiators/in direct sunlight.
Remove the battery from the device if it will not be used for a prolonged period!
Risk of equipment damage
Only use the specified battery type!
When inserting the battery ensure the correct polarity has been used! This is
indicated inside the battery cover.
If necessary, clean the contacts of the battery and the battery compartment
before inserting the battery.
Promptly remove drained batteries from the product!

Before use

The display is covered by protective film to protect from transport damage.
5
First remove the protective film.
To operate the device, insert the included battery (9 V block). Proceed as described
below:

Inserting / changing the battery

T o insert / change the battery
the battery cover in the direction of the arrow and flip open.
I f applicable, remove the old battery and insert a new one. If necessary, clean
the contacts of the battery compartment and the battery. Only use a 9 V block
battery type 6F22 or 6LR61.
, open the battery cover
13
. To do so, slide
4
GB/IE 21