Start-Up; Switching On And Off; Selecting The Temperature Unit; Measuring Temperature - Powerfix Profi HG00304 Instrucciones De Utilización Y De Seguridad

E nsure the correct polarity when inserting the battery. This is indicated on the
battery cover (Fig. C).
C lose the battery cover.
Your infrared thermometer is now ready for use.

Start-up

H old the handle of the device so the index finger can operate the Measure
button and the thumb buttons
3

Switching on and off

P ress the Measure button
up and a brief tone will sound.
P ress and hold the °C / °F / SET button
off the device. Two brief tones will sound.
W hen the device is no longer being used, the backlight of the display swill
switch off after approx. 15 seconds. After approx. 60 seconds the device will
automatically switch off; this is indicated by two brief tones.

Selecting the temperature unit

After switching on, the last temperature unit used will initially be selected.
B riefly press the °C / °F / SET button
(°C or °F).
The official temperature unit in Europe in °C.

Measuring temperature

Allow about 30 minutes for the device to acclimate to the conditions of the envi-
ronment.
22 GB/IE
to .
10 12
to switch on the device. The display
3
for approx. 3 seconds to switch
11
to change the temperature units
11
will light
5
7