Foot Switch Function List - Vox MINI GO 3 Manual Del Usuario

Foot switch function list

Operation when the foot switch is pressed
Function
Effect 1 On/Off Each time it is pressed, Effect 1 is switched on or off.
Effect 2 On/Off Each time it is pressed, Effect 2 is switched on or off.
Delay/reverb time The delay/reverb time is set at the interval at which the switch is pressed twice.
Tuner On/Off Each time it is pressed, the tuner is switched on or off.
For details, refer to "Foot switch function details (additional info)" on the next page.
Rhythm variation Each time it is pressed, the rhythm variation is switched 1
Rhythm tempo The rhythm tempo is set at the interval at which the switch is pressed twice.
Rhythm playback/stop Each time it is pressed, the rhythm is switched to playback or stop.
Rhythm mute On/Off Each time it is pressed, the rhythm mute is switched on or off.
Looper recording/ Each time you press the foot switch, the looper operation transitions.
playback/overdub
LOOP mode 1: Record
LOOP mode 2: Record
LOOP mode 3: Record
For details, refer to "Foot switch function details (additional info)" on the next
page.
Looper stop Press once to stop the looper.
Looper undo/redo Each time it is pressed, undo/redo is performed.
If you press and hold the button while suspended, the recorded phrases will be erased.
If you press and hold the button during playback and overdubbing has never been
performed, the recorded phrases are erased, and the looper is stopped.
Looper mute On/Off Each time it is pressed, the looper mute is switched on or off.
Collective control of Control the rhythm and looper all at once.
rhythm and looper
Looper not recorded: Start rhythm playback
recording (start playback)
Looper recorded: Start simultaneous playback of rhythm and looper (except
LOOP mode 3)
Press twice quickly to stop both.
For details, refer to "Foot switch function details (additional info)" on the next page.
Program switching Each time it is pressed, the user program is switched to A
(VOX MINI GO 50 only)
No assignment (Nothing occurs.)
2 3 1...
Playback Overdub
Overdub Playback
Playback Record
Start looper recording
B C
Assignment method (While holding down the foot switch
during normal operation, perform the following operation.)
Turn the EFFECTS knob 1.
Turn the EFFECTS knob 2.
Press the TIME button.
Press and hold the VARIATION button.
Press the VARIATION button.
Press the TEMPO button.
Press the START/STOP button.
Turn the RHYTHM LEVEL knob.
Press the LOOP button.
LOOP mode 1 is only available during normal operation. In
Foot Switch Function Setting mode, each time the LOOP
button is pressed, LOOP mode is switched to 1
(green orange red).
To continuously switch LOOP mode, wait at least half a
second before pressing the LOOP button. If you press the
LOOP button twice within half a second, "looper stop"
will be assigned.
Press the LOOP button quickly twice.
(During normal operation: Performs the looper stop
operation.)
Press and hold the LOOP button.
(During normal operation: Performs undo/redo operation.)
Turn the LOOP LEVEL knob.
Press both the START/STOP button and the LOOP button
at the same time.
End
[TIP] In Foot Switch Function Setting mode, you can
press the LOOP button while holding down the
START/STOP button to switch LOOP mode.
A... Press the PROGRAM button.
(During normal operation: Switches the program.)
Press and hold the foot switch.
("No assignment" cannot be set during normal operation.)
12
Display in Foot Switch Function Setting mode
The TIME LED (green) blinks regularly.
The TIME LED (red) blinks regularly.
The TIME LED (red) blinks.
The VARIATION LED (red - green - red) moves
smoothly from side to side.
The VARIATION LED (green) lights up in the order
of 1 2 3.
The center (green) of the VARIATION LED blinks.
During normal operation, the LED turns in the
same way as rhythm playback.
The VARIATION LED (green) blinks regularly.
LOOP mode 1: The LOOP LED (green) lights up.
LOOP mode 2: The LOOP LED (orange) lights up.
LOOP mode 3: The LOOP LED (red) lights up.
2 3
[TIP] You can assign different modes to
respective switches to make usage more
convenient.
The LOOP LED (green) blinks.
The looper is suspended (with phrase) during
normal operation.
The LOOP LED (green) blinks quickly twice every
second.
The LOOP LED (green) blinks regularly.
VARIATION LED:
Turns in the same way as rhythm playback during
normal operation.
LOOP LED:
LOOP mode 1: The LOOP LED (green) lights up.
LOOP mode 2: The LOOP LED (orange) lights up.
LOOP mode 3: The LOOP LED (red) lights up.
The PROGRAM LED turns green
All turns off.
orange red.