Synchronous Operation Of Rhythm And Looper - Vox MINI GO 3 Manual Del Usuario

List of the LOOP button operations and functions
Short-press LOOP
LOOP LED status
button
Suspended (does
Turns OFF Turns OFF
not record)
Recording standby Blinks red Recording starts
Recording ends
Recording Lights up red
Plays back
Suspended
Blinks green Playback starts
(recorded)
Lights up green
Plays back Overdubbing
(*2)
Lights up orange
Overdubbing Plays back
(*2)
*1 Press the button twice within half a second.
*2 The LED turns off for a moment at the beginning of a loop.
*3 If you have never overdubbed, the recorded phrases will be erased.

Synchronous operation of rhythm and looper

The looper function can be used together with the rhythm function.
Looper recording during rhythm playback (quantize)
If you record a looper during rhythm playback, the loop length is automatically adjusted
to match the rhythm beat or bar length when recording is stopped (quantize).
Looper : Quantize
Rhythm
Pattern
Looper
[TIP] The rhythm tempo is quantized to one beat, two beats, or a well-separated bar length.
If the genre is 3/5/7, the rhythm tempo is not quantized to two beats long.
Twice-press LOOP Press-hold LOOP
button (*1) button
(The twice-press and press-hold functions
are not available.)
Recording ends Cancels recording,
Stops Stops
Stops Erases
Stops Undoes/Redoes (*3)
Undoes
Stops
back
. . .
( fill )
( cut )
( fill )
( cut )
[TIP] The relative position between the beginning of the rhythm and the beginning of
the looper is stored, and when simultaneous playback is performed, the rhythm
and looper are played back while the same relative position as Recording mode
is maintained (refer to "Simultaneous playback of rhythm and looper").
Rhythm playback during looper playback (Automatic tempo adjustment)
If the rhythm is played back during loop playback, the rhythm tempo is automatically
set based on the rhythm tempo before playback and the length of the recorded phrase.
Rhythm: Auto Tempo Adjustment
Loop Phrase
Plays
Rhythm Tempo[bpm]
40 - 60
60 - 120
120 - 240
[TIP] Calculate the tempo at which the looper's phrase length is one beat, two beats, or a
well-separated bar length. The number of bars is 1, 2, 4, 8, 12, 16, 24, 32, or 48.
If the genre is 3/5/7, the rhythm is not set to a tempo that is two beats long
[TIP] When the looper is recorded and quantized during rhythm playback, the tempo
will not change even if you stop the rhythm and play it back again.
Simultaneous playback of rhythm and looper
When a looper has already been recorded and both the rhythm and the
looper are suspended, if you press both the RHYTHM button and the LOOP
button, the rhythm and looper start playback at the same time. If a looper is
recorded during rhythm playback, the rhythm and looper are played back
while the same relative position as Recording mode is maintained.
[TIP] The looper is always played from the beginning, and the rhythm is played from
the middle according to the relative position.
[TIP] The rhythm tempo is automatically adjusted even in the case of the
simultaneous playback.
If a looper is recorded while the rhythm is suspended, the relative position is cleared to 0.
If the rhythm tempo is changed, the relative positions of the rhythm and looper are cleared to 0.
9
1.5 sec
40
80
160