Cleaning The Tubular Filter - Miele professional A 800 Instrucciones De Manejo

en - Areas of application
26

Cleaning the tubular filter

 Clean the tubular filter at least once a week to ensure it main‐
tains the correct filtration efficiency.
Remove the tubular filter.

Rinse it under running water to remove any coarse soiling.

Use the Miele A 804 brush to clean inside the filter. Move the brush

in and out of the whole length of the tubular filter several times.
Then rinse the inside of the tube thoroughly with running water.

Remove any possible soiling from the O rings and check them for

any visible wear and tear.
Replace the tubular filter.

Then rinse the brush thoroughly under running water.

If wished, the tubular filter and the brush can be cleaned in the wash‐
er-disinfector after cleaning inside the filter with the brush. Place the
filter and the brush loose in a basket or mobile unit to do so.
The brush will suffer wear and tear and should therefore be re‐
placed every 2 to 3 years.