Phonic ACAPELA 16 Manual Del Usuario página 14

Fader Groups
The Acapela 16 offers a number of pages that offer properties of the main page of the iPad control software
that allows control of faders, EQ, panning, dynamics, on/off status and soloing, grouped into up to 8 channels
per page. The volume control and on button are also present on these screen.
These pages are all accessed by selecting the meters above the corresponding pages. There is a page for
Channels 1 to 8, Channels 9 to 16, Channel 17 and 18 (USB Audio), Aux 1 to 4, Group 1 to 4, Multi 1 to 4,
Control Room and Main. These pages offer access to the following features:
Faders: To adjust the level of channels, touch and
hold the onscreen virtual faders and slide your finger
up and down the screen.
Naming: Each channel can have its named changed
by pushing the name at the bottom of the screen.
Give each channel its own name to help identify the
respective signal. These names are not mirrored
within the Acapela 16 software.
Pre/Post Button: This adjusts the channel's meter
(found at the top of the screen) between that of a
pre-fader and post-fader meter. This allows you to
view the difference between the incoming input signal
and the signal going out to various mixes.
12
On/Off: Turn the individual channels on and off using
the ON button. When the channel is on, the button
will be illuminated.
Solo: The solo buttons send the respective signals to
the Control Room mix. For more solo settings, users
can view the properties within the Acapela's GUI.
Stereo/Mono: These buttons are available in the
Control Room and Main screen. They essentially
determine whether the corresponding mix is a stereo
mix, or dual mono – where both left and right signals
will be made up of the same signal.
Acapela 16