Astralpool ECO Manual Tecnico página 6

ECO ELECTRICHEAT
4 TROUBLE SHOOTING
THE EQUIPMENT DOES´T WORK
CAUSE #1: Power failure external to the heater.
SOLUTION #1: Check and fix power supply.
UNIT WORKS INTERMITENTLY
CAUSE #1: Water flow near minimum value.
SOLUTION #1: Check water flow and increase it if
necessary.
UNIT IS SWITCHED ON BUT IT IS NOT HEATING WATER
CAUSE #1: Check if temperature set point has been reached. If so, the unit is not heating water
since water already has desired temperature:
CAUSE #2: Check if there is water flow. If water flow is not detected by the heater, the unit is not
allowed to heat water.
SOLUTION #2: Increase water flow.
CAUSE #3: The equipment does not heat and has enough water flou.
SOLUTION #3: Chech that the thermostat works.
CAUSE #4: Flowswitch failure.
SOLUTION #4: Check if flow switch is working properly and replace if necesary.
UNIT IS SWITCHED ON AND WORKING BUT AFTER MANY TIME NO WARMER WATER APPRECIATED
CAUSE #1: Heating elements out of order.
SOLUTION #1: Check resistance between the poles of the heating elements. Replace if
necessary.
© ASTRALPOOL 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT
CAUSE #2: Water flow near minimum value due to
dirt in filter.
SOLUTION #2: Back wash the filter to restore flow.
.
ENGLISH
Pg: 6