Terminal Connections - Simrad BSM-2 Manual De Instrucciones

10 | BSM-2 Installation manual
BSM-2_IM_988-0170-09_A.indb 10

Terminal connections

1
Select cable inlets according to cable diameter and
labelling on the front plate
POWER
Cable
M20
Transducer 1
-
Transducer 2
-
M16
Power
-
Speed
-
Temperature 1
-
Temperature 2
-
2
Remove the outer sealing nuts from selected cable
glands, and thread those on to the cables
3 Terminate the wires to the terminal blocks
according to the terminal specification in the
following pages
4 Connect the terminal blocks to the pcb
5 Tighten the outer sealing nuts by hand
6
Close the BSM-2 cover and secure the cables
XDCR LO
XDCR HI
SPEED TEMP 1 TEMP 2
Cable diameter
10.0 mm - 14.0 mm
(3.94" - 5.51")
6.0 mm - 10.0 mm
(2.36" - 3.94")
2/14/2011 2:52:26 PM