Technical Specification; Power Requirements - Simrad BSM-2 Manual De Instrucciones

Compliance
Technical
Standards
Waterproof
Humidity
Storage
Temperature
Operating
Temperature
Connectors
Weight
Dimensions
(WxHxD) mm/
in
Mounting
Power Output
Power
Consumption
BSM-2_IM_988-0170-09_A.indb 17

Technical specification

Compliance and Environmental
CE, C-TICK
IEC 60945,
IEC 60529
IPX5
Up to 95% at 35°C non-
condensing
–30°C to +70°C
–15°C to +55°C
General
6 Glands and 1 Ethernet
4.8 kg (10.6 lbs)
340x100x289 mm
(13.38x3.94x11.37 inches)
4 keyholed mounting tabs
Sonar Specifications
250 Watts RMS
2,000 Watts (peak to
peak)

Power requirements

Range dependent –
normally less than 10W
Glands: Depth transducer
(x2), Temperature (x2), Speed
transducer, Power Connector: 5
pin Yellow RJ45
Die Cast Aluminum
With watertight glands and
connector outside dimensions
included
Mount below deck but NOT in
engine compartment
With CHIRP; Transducer
dependent with 3 impedance taps
3A internal fuse
BSM-2 Installation manual | 17
2/14/2011 2:52:33 PM