Before You Start Testing
About the Meter and Test Strips
WArning
• Carefully read and follow the instructions in the Owner's Booklet and package inserts for the
test strips and control solution. it is very important to follow the instructions in order to
prevent a wrong result or improper treatment.
• inspect the container of test strips before using the test strips for the first time. if you see any
damage to the container cap or if anything prevents the cap from closing properly, do not use
the test strips. Contact the ACCU‑CHEK Customer Care Service Center. Damaged test strips can
cause inaccurate results, which could lead to improper treatment.
• The meter, test strips, and control solution are only for use outside the body (in vitro). Do not
eat the test strips. Do not swallow or inject the control solution or use the control solution for
any purpose other than testing the ACCU‑CHEK nano SmartView system.
nOTE
• Set the time and date on the meter before you begin testing.
• Although you always apply fresh capillary whole blood to the test strip, the system has been
calibrated to deliver plasma‑like values for easier comparison to lab results.
Special information for Caregivers
• Do not use this device to measure blood glucose in people who are experiencing cardiovascular collapse
(severe shock) or decreased peripheral blood flow.
• Consult your healthcare professional to determine if it is appropriate for your child to be taught how to use
the meter system or any other medical products.
11