Units Management; Add A Unit; Edit Unit Data; Remove/Restore A Unit - Daikin AIRZONE DKN CLOUD NA Manual De Instrucciones

UNITS MANAGEMENT

Add a unit

Open the drop-down menu and tap
To add a new Daikin unit, tap
Important: It is necessary to have the Bluetooth function activated on your iOS or Android
to add the unit.
1. Select the unit from the list of available units to add.
Note: If your unit does not appear, confirm the Bluetooth function of your iOS or
Android is activated and the DKN WiFi Controller is working properly.
2. Tap the selected unit again to access.
Connect to Network
3. Tap
write its password.
Note: If the WiFi connected status is displayed red, please verify that the password
is correct.
4. Associate
Tap
5. Set the name, group and icon of the unit. If there is no group, create a new one and
set the name, temperature units and time zone of the group.
If the unit has already been added and it needs to be released in order to be added by other
Release
user, tap and enter the pin code located in the DKN WiFi Controller.

Edit unit data

Open the drop-down menu, tap
Select the unit to be edited.
Edit the parameters: Name and icon of the unit.
Delete
Tap to remove the unit.
If there is no unit, tap

Remove/restore a unit

Open the drop-down menu, go to
Tap the unit to be removed or restored.
Delete
Tap to remove the unit.

Release unit

Open the drop-down menu and tap
To find a Daikin unit, tap
Important: It is necessary to have the Bluetooth function activated on your iOS or Android
to add the unit.
Release
Tap and enter the pin code located in the DKN WiFi Controller if required.
Configure Unit
Search units
to choose the network to connect, select the network and
.
Manage Units
Configure unit
and enter the following parameters:
Manage Units
Configure Unit
Search units
.
.
and follow the steps below.
.
.
.
7