Aqua Marina BREEZE BT-19BRP Manual De Instrucciones página 12

2. Draw the outline of the patch using chalk or pencil (do not use ink).
inch) overlap on all sides.
3. Apply tape along the outline of the patch. This will prevent the glue
from spreading outside the patch area.
4
Be careful not to trap any air bubbles.
the patch and the board.
Use a metal spatula or spoon and firm pressure to ensure a good bond
and to remove any air bubbles.
5
Allow the glue to cure with
the board un-inflated for 24
hours prior to use.
6