bewell connect MyScale Initial BW-SC3 Manual De Instrucciones página 51

Recommended separation distances between portable and mobile RF communications
equipment and the BW-SC2 and BW-SC6. The BW-SC2 and BW-SC6 are intended for use
n in an electromagnetic environment in which radiated RF disturbances are controlled. The
customer or the user of the BW-SC2 and BW-SC6 can help prevent electromagnetic inter-
ference by maintaining a minimum distance between portable and mobile RF communi-
cations equipment (transmitters) and the BW-SC2 and BW-SC6 as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum output
of transmitter
For transmitters rates at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmit-
ter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800MHz, the reparation distance for the higher frequency range
applies.
NOTE 2 these guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
w
150 MHz to 80 MHz
0.01
0.1
1
10
100
BewellConnect - BW-SC2 / BW-SC3 / BW-SC4 / BW-SC6 - User Manual - 082017v1
Separation distance according to
frequency of transmitter m
80 MHz to 800 MHz
[ 3.5
d = d =
] √
P
V1
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
[ 3.5 [ 7
d =
] √
P
E1
0.12 0.23
0.38 0.73
1.2
3.8
12
] √
P
E1
2.3
7.3
23
51