Velleman DVR1A Manual De Instrucciones página 8

3) On-Screen Display for Date
1. Press ▲or ▼to choose 'Date display' and the ENTER button to open the 'Date display' menu.
2. Select a format with ▲or ▼: Y-M-D (year-month-day), M-D-Y (month-day-year), D-M-Y (day-month-year) or OFF
(date is not displayed).
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
4) System Date Set-Up
1. Press ▲or ▼to choose 'Date' and the ENTER button to open the system date menu.
2. Press ▲or ▼to change the value and ◄ or ►to move to the previous or next value.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
5) System Time Set-Up
1. Press ▲or ▼to choose 'Time' and the ENTER button to open the system time menu.
2. Press ▲or ▼to change the value and ◄ or ►to move to the previous or next value.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
6) Change Password (default password : 0000)
1. Press ▲or ▼to choose 'New password' and the ENTER button to open the password menu.
2. Press ▲or ▼to change the value and ◄ or ►to move to the previous or next value.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
7) Clear HDD Yes / No Set-Up
1. Press ▲or ▼to choose 'Clear HDD' and the ENTER button.
2. Press ►or ◄ to choose between Yes and No:
Yes: press ►to clear the HDD.
No: press◄ NOT to clear the HDD.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
8) System Reset Set-Up
1. Press ▲or ▼to choose 'System Reset' and the ENTER button.
2. Press ▲or ▼to choose system reset set-up YES or NO.
Yes: to reset the system (load default system settings)
However, Date / Time & Password set-up will not be changed.
No: not to reset the system.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
Note : If operation without any action until 60 seconds, it will close the set-up mode.
DVR1A
- 8 -
All Data in HDD
Will Be Cleared
Are you sure?
(◄: No ►: Yes)
(System)
Buzzer: On
HDD Overwrite: No
Date Display: Y-M-D
Date: 2002-JUL-14 (SUN)
Time: 22:38:29
New Password: xxxx
Clear HDD: No
► System Reset: No
VELLEMAN