Installing The Heki 4 Plus - Dometic Heki 4 Plus Manual De Instrucciones

Heki 4 Plus
6.2 Using the reinforcing rails
Supplementary to fig. 3
➤ Before installation, check whether the roof hole needs reinforcing.
➤ Remove the foam according to the width of your reinforcing rail (not in
scope of delivery) (A).
➤ Fit the reinforcing rails (B).
7

Installing the Heki 4 Plus

WARNING! Beware of injury
!
Disconnect the vehicle power supply before you begin and make
sure it cannot be restarted.
NOTICE!
A
Make sure that you do not damage any cables during installation.
See fig. 4
➤ Lay the power supply line in the middle on the long side, which is on the
opposite side of the hinge.
EN
Installing the Heki 4 Plus
23