Care And Maintenance - Climadiff CLI24 Instrucciones De Uso

Cave de service intégrable en colonne
Ocultar thumbs Ver también para CLI24:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 104
Criss-crossing types
Top-to-bottom neck-to-neck:
Note the difference in depth!
Top-to-bottom neck between bottle bodies:
Increased loading.
-
Verify that you can shut the door without touching a bottle before closing.
When loading several bottles at once, it will take more time for the unit to reach the desired
-
temperature.
Examples of serving temperatures
Opinions vary, and the ambient temperature too, but many people agree on the following:
Prestigious Bordeaux wines – Reds
Prestigious Burgundy wines – Reds
Prestigious dry white vintages
Light, young, fruity reds
Provence rosés, primeur wines
Dry whites and vin de pays reds
Vin de pays whites
Champagnes
Sweet wines

8. CARE AND MAINTENANCE

Before cleaning your appliance (something that should be done regularly), disconnect it by removing
the plug or by pulling the fuse on the circuit.
Before using your appliance for the first time and regularly after that, we recommend that you clean
the inside and outside (front, side and top) with warm mixed with a gentle cleaning product. Rinse with
clean water and allow drying before reconnecting. Do not use solvents or abrasives.
When the appliance is switched on for the first time, there may be a residual odor. In that case, runt
the appliance empty for a few hours at the coldest possible temperature. The cold will kill any odors.
In case of a power cut
Most power cuts are resolved within a short time. A power cut of 1 or 2 hours will not affect the
temperature in your cabinet. To protect your wines during a power cut, avoid opening the door as
much as possible. During very long power cuts, take the necessary measures to protect your wine.
 If the appliance is disconnected or if there is a power cut, you must wait three to five minutes
before re- starting. If you try to re-start before this time, the compressor will only re-start after 3 to 5
minutes (if the temperature requires).
 When switching on for the first time or following a prolonged shutdown, it is possible that when re-
starting, the temperatures selected and those displayed are not the same. This is normal. It will
16 – 17°C
15 – 16°C
14 – 16°C
11 – 12°C
10 – 12°C
10 – 12°C
8 – 10°C
7 – 8°C
6°C
47

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Cli45

Tabla de contenido