Descargar Imprimir esta página

Bebeconfort Easia Manual De Instrucciones página 37

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
WARNING:
To avoid the risk of suffocation, keep all plastic
bag s and packaging out of reach of babies and
young children.
Care advice
1. Do not leave the child in the sling for more
than 1.5 hours.
2. Check the adjustments and buckles.
3. Do not strap the child in so tightly that its
breathing is restricted; ensure that its nose is
clear by turning its head to one side.
Maintenance
Machine wash up to 30° with reduced spinning
cycle.
Environment
Keep all plastic packaging materials out of reach
of your child to avoid the risk of suffocation.
For environmental reasons, when you have
stopped using this product, we ask that you
dispose of the product in the proper waste
facilities in accordance with local legislation.
Questions
Please contact your local Bébéconfort distributor
or visit our website, www.bebeconfort.com
When doing so please have the following
information to hand:
- Serial number
- Age (height) and weight of your child.
Warranty
We guarantee that this product has been
manufactured in accordance with European safety
standards and quality requirements in force at the
present time and that, at the time of its purchase
by the retailer, this product was exempt from any
defect of composition and manufacture. During its
production process, this product was also
subjected to various quality controls.
If, in spite of all our efforts, a material and/or
manufacturing defect should occur during the
warranty period of 24 months (used normally and
in accordance with the instructions), we undertake
to respect the warranty conditions. Please contact
your retailer. For more detailed information
concerning the applicability of the warranty
conditions, please contact your retailer or go to:
www.bebeconfort.com.
The warranty does not apply in the following
cases:
• When the product has been used for a purpose other
than that provided for in the instructions for use.
• When the product has been repaired by a
non-approved supplier.
• When the product is not returned to the
manufacturer with the original till receipt
(issued by the retailer and/or importer).
• When repairs have been carried out by a third
party or a non-approved retailer.
• When the defect was caused by incorrect or
insufficient use or maintenance, neglect or
impacts at the level of the textile and/or chassis.
EN
EN
37

Publicidad

loading