Safety; Operation - Liemke MERLIN–42 Manual De Instrucciones

05. SAFETY

The thermal imager is not recommended to be used in high
temperature environment for a long time, if the temperature is too
high, the imager will enter the high-temperature protection state,
and automatically shut down.
The recommended temperature for use is −10°C to +50°C.
> Make sure that the USB port cover is tightly closed when using in
damp environments, e.g. rainy days.
> Under any circumstances (whether on or off), do not expose
the lens of the thermal imager directly to high-intensity radiation
sources (such as the sun, laser, etc.), to avoid irreversible dama-
ge to the device.
Disposal of waste electrical equipment and batteries
Do not dispose of waste electrical equipment and batteries
in the household waste. Please hand them in to your local
recycling centre. Batteries should be fully discharged when
disposed of.
CE marking

06. OPERATION

The devices are in conformity with the EU
directives:
EMC Directive 2014/35/EU
RoHS Directive 2011/65/EU
ATTENTION!
The lens of the device must not be pointed
at any sources of intense energy, such as
laser-emitting devices or the sun. This may
damage the electronic components in the
device. Damage caused by failure to comply
with the operating guidelines is not covered
under warranty.