Reception Of Sensor Signal; Operating The Main Unit; Operating The Sensor - Oregon Scientific EW98 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
4.CHANNEL slide switch:
- Assign the sensor to channel 1, 2 or 3.
5.BATTERY COMPARTMENT:
- Accommodates 2 AAA size batteries.
6.BATTERY DOOR

RECEPTION OF SENSOR SIGNAL

OPERATING THE MAIN UNIT

1.
Remove the battery door and slide "UK/EU"
switch to select the desired country version.
2.
Insert 2 new AA size batteries as per the polarity
information
marked
compartment.
3.
Press "RESET" key to restart the clock.
4.
Slide "°C/°F" switch to select between Celsius
and Fahrenheit.
5.
Replace the battery door.
6.
Press "+/CHANNEL" key to select the desired
channel.
on
the
battery
5
Main unit is searching for the sensor(s)
(the icon will be flashing)
The sensor(s) cannot be found
Sensor 1 has been found
(the icon will be displayed,
but won't flash)
and "--"
The sensor(s) cannot be found after
(Outdoor
temperature
operating the main unit for 60 minutes
Area)
Note When the sensor signal is received, the icon
" " will be displayed on the LCD.

OPERATING THE SENSOR

1.
Remove the battery door and slide
"CHANNEL" switch to synchronize the channel
with receiver.
2.
Insert 2 new AAA size batteries as per the
polarity information marked on the battery
compartment.
3.
Press "RESET" key to restart the clock.
4.
Replace the battery door.

Publicidad

Tabla de contenido
loading

Tabla de contenido