Lcd Display; Sensor - Oregon Scientific EW98 Manual De Instrucciones

15.SENSOR key:
- Press it once to turn on the reception of
transmitter signal (433 MHz).
- During the reception period, press and hold it
for 3 seconds to stop the reception.
16.PROJECTION ON/OFF slide switch:
- Slide it to turn on/off the projector.
17.180° FLIP key:
- Press it to rotate the projected image by 180°.
18.RCC key:
- In normal time mode, press it once to receive
the RC signal for reception testing.
- During the reception period, press and hold it
for 8 seconds to stop the reception.
19.UK/EU slide switch:
- Slide it to select the country version between
EU (Germany) and UK (England).
20.BATTERY DOOR

LCD DISPLAY

1. Low battery indicator
2. Signal reception indicator
3. Indoor temperature
4. Channel
5. Sensor signal
6. Outdoor temperature
1
2
7. °C & °F
3
8. Alarm time & Date
9. Min. and Max. temperature
10. Time

SENSOR

1
2
3
1.LED indicator:
- Flashes when the remote unit transmits a reading.
2.Wall-mounting holder:
- Supports the sensor on the wall.
3.RESET key:
- Press it to restart the sensor and return all
values to default values.
4
10
9
8
4
5 6 7
4
5 6