Bluetooth Pairing (Ri-Thermo ® Sensiopro+ Only); About Normal Body Temperature & Fever - Riester ri-thermo sensioPRO Instrucciones De Uso

When the memory is full, the oldest result is deleted as the new one
added. When the last record is displayed, press MEM button again to
return to the first record.
STEP 2. Exit the memory.
Press button to return to the measurement mode or keep the
meter in idle for 30 seconds in the memory mode, it will switch off
automatically.
®
BLUETOOTH PAIRING (ri-thermo
sensioPRO+ ONLY)
You can transmit your data from the thermometer to compatible devices
via bluetooth. Please note that you must complete the pairing between
the thermometer and the bluetooth receiver before transmitting data.
Pairing mode is automatically active when starting the device. Please
note the respective manual of the device you inted to pair.
ABOUT NORMAL BODY TEMPERATURE &
FEVER
Body temperature can vary from one individual / person to next. It
also varies by location on the body and time of day. Below shows the
statistical normal ranges from different sites. Please keep in mind that
temperatures measured from different sites, even at the same time,
should not be directly compared.
Fever indicates that the body temperature is higher than normal. This
symptom may be caused by infection, overdressing or immunization.
Some people may not experience fever even when they are ill. These
include, but are not limited to, infants younger than 3 months old,
persons with compromised immune systems, persons taking antibiotics,
steroids or antipyretics (aspirin, ibuprofen, acetaminophen), or persons
with certain chronic illnesses.
EN-11