Operation - Aircare ESSENTIALS MESA MU320DWAL Manual De Instrucciones

OPERATION

Activate controls on unit front
NOTE: For shipping purpose, the controls on the
MESA's front panel are locked and must be activated
by the remote control.
1. With the MESA filled and plugged in, take the
remote control out of its cellophane envelope,
and remove the tab to activate the battery.
2. Point the remote control toward the front control
panel and press the humidity button for four or
five seconds.
Set Mist Flow Rate
1. The MESA has three mist flow rate options.
Press the humidity button on the remote to
increase flow, or press the power button on the
unit. Each time the button is pressed, the color
indication of the power button will change:
• A red power button indicates high flow.
• A yellow power button indicates medium flow.
• A green power button indicates low flow.
Set Mist Temperature
1. The MESA has warm and cool mist options. The
default setting is cool mist.
2. To change to warm mist, press the heat button
on the remote, or press the plus button on the
unit to change this setting.
3. The mist will start to change to the warmer tem-
perature.
NOTE: It will take a few minutes for the temperature to
change when switching between cool and warm mist.
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
7
+
REMOTE
UNIT