Toshiba Canvio AeroMobile Manual De Instrucciones página 10

Ocultar thumbs Ver también para Canvio AeroMobile:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10
Always use power cables/cords and power
sources that comply with the voltage and
frequency specifications and requirements of the
country of use.
Be careful if you use a multiple connector as an
overload of one socket could cause a fire or
electric shock, possibly resulting in serious injury.
Always confirm that the power plug (and
extension cable plug if used) has been fully
inserted into the socket, to ensure a secure
electrical connection.
Always make sure the drive and AC adapter have
adequate ventilation and are protected from
overheating when the AC adapter is connected to
a power outlet. Do not cover the drive during
operation. Inadequate ventilation may cause the
drive and AC adapter to overheat resulting in a
fire or electric shock and serious injury.
If dust gets on the power plug connectors or
connector base, turn the power off and
disconnect the power plug. Then clean the
connector and/or connector base with a dry soft
cloth.
Avoid extended contact between the drive and
your skin. The drive may become hot! Avoid
prolonged contact to prevent skin irritation and/or
heat injury.
Never pull on a power cord/cable to remove a
plug from a socket. Always grasp the plug
directly.
Do not place the drive on a shaky table, uneven,
tilted surface or other unstable location. The drive
may fall, causing damage to the drive or possible
injury.

Publicidad

Tabla de contenido
loading

Tabla de contenido