QSC Q-SYS PS-X Manual Del Usuario Del Hardware página 5

Introduction
The Page Station Expander is designed to be mounted on a wall housed in a standard, US 2-gang, electrical wall box and connects directly to the
rear of a Q-Sys Page Station via Cat 5e cable. Voice input is provided through a handheld dynamic push-to-talk microphone. A unique magnetic
docking system and cable strain relief allow fl exibility in microphone placement when not in use, yet help deter theft or removal of the microphone.
Combining the Page Station Expander and the Page Station provide multiple inputs for a common zone, for example both the kiosk and jet-way of an
airport gate can easily be served by this combination.
For detailed information about the Q-Sys Page Stations, and the Q-LAN Network, refer to the Page Station User Guide, and the Q-Sys Designer
online help.
Page Station Expander Features
BUSY
1
READY
2
3
4
— Figure 1 —
1. Busy and Ready LED
indicators
2. Push-to-talk button
3. Magnetic Surface
4. Locking Strain Relief
1. Mounting Tabs
2. RJ-45 Connector (to Page
Station)
5
— Figure 2 —
3. Mounting Screw hole
4. Locking Strain Relief
1
2
EN
3
4