General Requirements - QSC Q-SYS PS-X Manual Del Usuario Del Hardware

Unpacking
There are no special unpacking precautions. However, it is recommended that you keep the original packing materials for reuse in the rare event that
service is required. If service is required and the original packing material is not available, ensure that the unit is adequately protected for shipment
(use a strong box of appropriate size, suffi cient packing/padding material to prevent load shifting or impact damage) or call QSC's Technical Services
Group for replacement packing material and a carton.
PS-X Packing List
Part Name
PS-X – Page Station Expander
Mounting Bracket
Page Station Connector Adapter
Flat-head screw
Warning information sheet
Q-Sys PS-X Quick Start Guide
Installation
The Q-Sys PS-X is mounted using a new construction, UL listed, 2-gang electrical box.

General Requirements

• The PS-X must have access to a Cat 5e connection (RJ45 Class 2) to the associated Q-Sys Page Station.
• The PS-X must be mounted in a wall no less than 2.38" (60.5 mm) deep.
• The PS-X should be mounted in a location where it will not be an obstruction to normal traffi c.
• The Cat 5e cable must be less than or equal to 100 meters.
Qty Description
1
1
1
1 #8-32, 0.5"
1
1 TD-000358-00
7
EN