To attach a strap, open the battery cover, thread the strap through the
hole at the side of the speaker so that the loop runs around the small pin
(7), tighten the strap, and close the cover.
To take the speaker with you, switch it off, coil the speaker cable, and
insert the audio plug into the slot at the bottom of the device.
Care and maintenance
Your device is a product of superior design and craftsmanship and should
be treated with care. The following suggestions will help you protect your
warranty coverage.
•
Keep the device dry. Precipitation, humidity, and all types of liquids
or moisture can contain minerals that will corrode electronic
circuits. If your device does get wet, remove the batteries, and allow
the device to dry completely before replacing them.
•
Do not use or store the device in dusty, dirty areas. Its moving parts
and electronic components can be damaged.
ENGLISH