Battery Replacement Instructions
Phone Best Power's Worldwide Service to order a replacement battery. It must be the same
1
type and rating as the original battery. See Battery information in Specifications.
2
Switch off and unplug the protected load equipment from the Patriot. Then, turn off the
Patriot and disconnect the line cord.
3
Turn the Patriot upside down. Models 425 and 600: Use a screwdriver to remove four
screws securing the battery cover (1), and lift the battery cover off of the Patriot case.
Model 250: Press down on the battery cover (1) tabs, and slide the battery cover off of the
end of the Patriot case.
Lift the battery (2) up and out of the Patriot case.
4
5
Disconnect the red and black cables from the used battery. Dispose of old batteries properly.
Reconnect the cables to the new battery; red to positive (+), black to negative (-), and slide
6
the battery back into the case.
7
Return the battery cover into place over the battery. Push the cover to snap it securely in
place. Replace any battery cover screws that were removed to access the battery.
Turn the Patriot right side up. Reconnect the Patriot's line cord and turn the unit on.
8
Reconnect the load equipment. Switch on the protected load equipment one piece at a time.
2
1
1 - Battery Cover
2 - Battery
9
ENGLISH