Denon AVR-1803 Instrucciones De Operación página 20

ENGLISH
Dolby Surround Pro Logic II
1 2 4, 6
1
Select the function to which the component you
want to play is connected.
Example: DVD/VDP
(Main unit) (Remote control unit)
2 Select the Dolby Surround Pro Logic II mode.
(Main unit) (Remote control unit)
• The Dolby Pro Logic indicator lights.
Display Light
3
Play a program source with the
mark.
• For operating instructions, refer to the manuals
of the respective components.
4 Select the surround parameter mode.
Display
MODE cinema
(Main unit) (Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
20
mode
The Dolby Surround Pro
2
Logic II Cinema or Music
mode can be chosen
directly by pressing the
1
CINEMA
button on the remote
control
5, 7
playback in the Dolby
Surround Pro Logic II
mode.
4, 6
8
5, 7 5, 7
5 Select the optimum mode for the source.
(Main unit)
MODE emulation MODE cinema
or
6 Set the surround parameters according to the
mode.
(Main unit)
• The mode switches as shown below each
time the button is pressed.
MODE EMULATION MODE CINEMA
CINEMA EQ CINEMA EQ
DEFAULT DEFAULT
7 Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
OFF
or
or MUSIC
• PANORAMA setting
unit during
PANORAMA
OFF
or
• DIMENSION setting
DIMENSION
0
or
(Remote control unit)
DTS NEO:6 mode
MODE music
or
1
(Remote control unit)
1
Select the function to which the component you
want to play is connected.
Example: DVD/VDP
MODE MUSIC
PANORAMA
DIMENSION
CENTER WIDTH
(Main unit)
DEFAULT
• CENTER WIDTH setting
0
ON
or
• DEFAULT setting
OFF YES
ON
Select "Yes" to reset to the factory defaults.
or
8 Press the ENTER button to finish surround
parameter mode.
3
3 6
or
(Remote control unit)
NOTE:
• When making parameter settings, the display will
return to the regular condition several seconds
after the last button was pressed and the setting
will be completed.
2
1
2 4, 6 5, 7
8
5, 7
(Remote control unit)
CENTER WIDTH O
4 7
or or
DEFAULT Y/N
Y/N NO
or or
The DTS NEO:6 Cinema
or Music mode can be
chosen directly by
pressing the CINEMA or
MUSIC button on the
remote control unit
during playback in the
DTS NEO:6 mode.
4, 6
5, 7