Maintenance; Battery Replacement; Compatible Products - Textron Greenlee 501 Tracker II Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance

The only service required for maintaining proper operation is the periodic
replacement of the batteries in the transmitter and receiver units.
Electric shock hazard:
Before opening the case, remove the test leads from the circuit and shut off the
unit.
Failure to observe this warning could result in severe injury or death.

Battery Replacement

To replace the 501R battery:
1. Remove (2) screws and separate case.
2. Replace the 9V battery. Observe polarity.
3. Re-assemble case and tighten screws. DO NOT OVERTIGHTEN SCREWS.
To replace the 501T battery:
1. Remove (2) screws (indicated by arrows) and separate case.
2. Replace (8) AA 1.5V batteries. Observe polarity.
3. Re-assemble case and tighten screws. DO NOT OVERTIGHTEN SCREWS.
Cleaning
Periodically wipe with a damp cloth and mild detergent; do not use abrasives or
solvents.

Compatible Products

Model PE2003 Ground Fault Locator
Model 701K Tone & Probe Kit
Model 77HP Tone Generator
Model 200EP Inductive Amplifier
Model 700C Cordura Case
Model 200FP Filter Probe
One-Year Limited Warranty
12
Model
PE2003

Publicidad

Tabla de contenido
loading

Tabla de contenido