Preface; Safety; Description; Intended Use - Nederman Airflow Alarm Kit Manual De Instrucciones

EN Airflow Alarm Kit
1

Preface

Read this manual carefully before installation, use and service of this product.
Replace the manual immediately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products including documentation.
This product is designed to meet the requirements of relevant EU directives.
To maintain this status, all installation, maintenance and repair is to be done
by qualified personnel using only original spare parts. Contact the nearest
authorized distributor or Nederman for advice on technical service and
obtaining spare parts. If there are any defective or missing parts when the
product is delivered, notify the carrier and the local Nederman representative
immediately.
2

Safety

This document contains important information that is presented either as a
warning, caution or note:
WARNING!
Warnings indicate a potential hazard to the health and safety of personnel,
and how that hazard may be avoided.
CAUTION!
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE! Notes contain other information that is important for personnel.
3

Description

3.1

Intended use

The Airflow Alarm monitors pressure conditions in a suitable duct.
3.2

Function

The Airflow Alarm is connected to a fan starter so that Airflow Alarm starts to
monitor automatically and simultaneously with the fan. The alarm is activated
when the static pressure in the duct is outside preset limits.
The Airflow Alarm can either monitor one particular exhaust point at a
workplace, or a group of workplaces connected to a single air duct leading to
the fan.
12
Risk of personal injury.
Risk of equipment damage.