Double Insulated Tools; Extension Cords; Technical Specifications - STEINEL HB 1750 Manual De Instrucciones

Double Insulated Tools

Tools marked with the words "Double Insulated" are equipped with a two prong plug. These
tools have a special insulation system that complies with applicable UL and CSA standards.
They do not require grounding. "Double Insulated" tools, like this one, have two prong cords and
can use either a two or three prong extension cord.
"This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way."

Extension Cords

As the distance from the supply outlet increases, heavier
gauge extension cords are required. The use of extension
cords of inadequate size wire causes a serious drop in volt-
age and loss of power. Protect the cord from damage. Keep
cords away from excessive heat, sharp edges and damp or
wet areas. Repair or replace damaged extension cords be-
fore using.

Technical specifications

Voltage
Output
Airflow
Temperatures
Available Temperature Keys
Protection class
Item No.
34750
34751
34752
34753
34754
34755
120 V / 60 Hz
1750 W
up to 23 CFM, adjustable with baffle
Level 1: 80°F
Level 2: selected by key
Red:
Orange: 750 – 1000 °F
Yellow: 500 – 750 °F
Grey:
Blue:
Double insulated
Model Description
HB 1750 Heat Blower with all 5 Keys
HB 1750 B Heat Blower with Blue Key
HB 1750 G Heat Blower with Gray Key
HB 1750 Y Heat Blower with Yellow Key
HB 1750 O Heat Blower with Orange Key
HB 1750 R Heat Blower with Red Key
English
1000 – 1200 °F
300 – 500 °F
200 – 300 °F
- 6 -
Ext. Cord Length
085 Ft.
100 Ft.
170 Ft.
270 Ft.
400 Ft.
650 Ft.
Temperature Range
200 – 1200 °F
200 – 300 °F
300 – 500 °F
500 – 750 °F
750 – 1000 °F
1000 – 1200 °F
Wire Size
14
12
10
08
06
04