Glass 1989 SAUNE Manual De Uso página 42

EN
E
XAMPLE IN THE PICTURE
Temperature set= 70°C
Duration of stove operation = 6 hours.
When the desired temperature is reached
in the sauna, the stove switches off.
The temperature set remains constant,
switching the stove in and off automatically.
The stove has a pre-set operation period
of about 6 hours; when the period has
elapsed, the stove switches off. Then the
system switches to "stand-by" mode.
SAUNA TEMPERATURE
To set the desired temperature, press the
"MENU" key.
The display shows the temperature value
set for the sauna. Within 10 seconds (LED
keys and
press the "MENU" key, switching to the
next SESSION DURATION setting.
NOTE:The temperature value set
remains stored and will be maintained
even when the display is switched on
the next time.
BIOSAUNA ON/OFF (stand-by)
By pressing the BIOSAUNA "ON/OFF"
The display upper line shows the value
blinking) It then returns to the actual
temperature value in the sauna (led
on). The lower line shows the humidity
level or the set OPERATION DURATION,
by starting the operation count-down.
:
(between min. 40ºC and
E
XAMPLE IN THE PICTURE
Temperature set = 70°C
Humidity level set = 50%H
When the desired humidity is reached in
humidity set remains constant, switching
period of about 6 hours; when the period
has elapsed, it switches off. Then the
system switches to "stand-by" mode.
switches off, the "water level" LED blinks
and the display shows the word "OFF".
Add water to the tank.
ATTENTION: Follow the operating
i n s t r u c t i o n s p r o v i d e d b y t h e
BIOSAUNA HUMIDITY
To set the desired humidity, press the
"MENU" key.
The display shows the humidity value set
for the sauna. Within 10 seconds (led
led blinking), set the desired value using
the and (from min. 10% t Max. 80%).
ATTENTION: In the BIOSAUNA mode, the
TEMPERATURE and HUMIDITY values
are interrelated
A high temperature will correspond to
low humidity and high humidity will
correspond to a low temperature.
The sum of the temperature and humidity
values cannot exceed 140.
To confirm the entered value press
the "MENU" key, switching to the next
SESSION DURATION setting.
NOTE: The value set remains stored
and will be maintained, even when the
display is switched on the next time.
10