Emerson FB1100 Flow Computer Instrucciones Para Un Uso Seguro página 4

DANGER
When installing units in a hazardous area, make sure all
installation components selected are labeled for use in
such areas. Installation and maintenance must be
performed only when the area is known to be non-
hazardous. Installation or maintenance in a hazardous
area could result in personal injury or property damage.
Always turn off the power to the FB1100 before you
attempt any type of wiring. Wiring of powered
equipment could result in personal injury or property
damage.
To avoid circuit damage when working
inside the unit, use appropriate electrostatic discharge
precautions, such as wearing a grounded wrist strap.
Check the input power polarity before connecting power
to the FB1100. Wiring of powered equipment could result
in personal injury or property damage.
The following tools are required for installation,
maintenance, and troubleshooting:
Personal computer running Microsoft
▪
Professional or Windows 8.1 Pro, or Windows 10 Pro
and Emerson Field Tools configuration software
(providing FBxConnect™).
#1 and #2 Phillips (cross-head) screwdrivers.
▪
3 mm (1/8-inch) flat-head screwdriver.
▪
Torque wrench.
▪
14 mm (9/16-inch) and 10 mm (3/8-inch) hexagonal
▪
wrenches.
Unpacking
You receive the FB1100 in a box. Remove it from the box.
Examine the packing list carefully to ensure you have all
components.
Installation
1. Find a suitable location for the FB1100. When
selecting an installation site, be sure to check all
clearances. The FB1100 housing is designed to
withstand a variety of inclement conditions. The
optional LCD should be visible and accessible for the
on-site operator.
www.Emerson.com/RemoteAutomation
® Windows ® 7
Safe Use Instructions – Emerson FB1100 Flow Computer
Figure 3. Front View of the FB1100
(with optional LCD and optional MVS sensor)
Figure 4. Side View of the FB1100
Figure 5. Top View of the FB1100
2. The FB1100 mounts either directly to a manifold on
the pipeline or indirectly on a two-inch pipe or pole.
See Figures 6 and 7.
Part D301768X012
September 2018
3