Test Mode; Language Selection - Shure ConferenceONE Guia Del Usuario

4

4.3 Test Mode

Activate test mode by pressing and holding both of the
and buttons for approximately three seconds.
The installed software version appears in the display and
the lighted rings on all delegate consoles illuminate in
order to permit simple detection of any cable breakage or
defective consoles.
Press the SELECT button to return to normal operating
mode.

4.4 Language Selection

Access the Language selection menu by pressing and
holding both the
seconds. The current language appears in the display.
Use the and
uage, then press the SELECT button to activate it and
return to the status page.
and buttons for approximately five
buttons to select a different menu lang-
C o n f e r e n c e O n e
S H U R E V e r . 1 . 0 i
S e l e c t L a n g u a g e
E n g l i s h
English
12